PA12 CS | CERAMIC-REINFORCED POLYAMIDE 12
STIFF, STABLE AND DIMENSIONALLY ACCURATE
PA12 CS is a ceramic-reinforced polyamide 12 developed for applications with increased requirements for stiffness and dimensional stability.
The ceramic reinforcement gives the material greater rigidity compared with standard PA12, making it particularly suitable for technical and functional components where dimensional stability is important.
PROPERTIES OF PA12 CS
PA12 CS combines the advantages of polyamide 12 with increased stiffness through ceramic reinforcement.
The material is particularly suitable for components that require high dimensional stability and reduced deformation under mechanical loads.
Key characteristics:
- Increased stiffness
- High dimensional stability
- Good mechanical properties
- Suitable for technical components
- Suitable for complex geometries
- Good post-processing and finishing options
TYPICAL APPLICATIONS
PA12 CS is particularly suitable for technical applications where stiffness and dimensional stability are important.
Typical applications include:
- Technical components
- Functional parts
- Housings and covers
- Holders and brackets
- Fixtures and production aids
- Dimensionally stable components
- Prototypes
- Small batches
- Components with increased stiffness requirements
WHEN IS PA12 CS THE RIGHT CHOICE?
PA12 CS is particularly interesting when standard PA12 does not provide sufficient stiffness for the required application.
The ceramic reinforcement can help reduce deformation and increase the dimensional stability of the component.
This makes PA12 CS especially suitable for technical applications where geometry and stability are key requirements.
PA12 CS OR PA12 AS?
The right material depends on the requirements of your component.
PA12 AS is our versatile standard material for a wide range of applications.
PA12 CS is ceramic-reinforced and is particularly suitable when increased stiffness and dimensional stability are required.
We will be happy to help you select the appropriate material for your application.
POST-PROCESSING & FINISHING
PA12 CS can also be post-processed and finished after additive manufacturing.
Depending on the application and required surface quality, suitable processes can be used to improve the appearance and surface characteristics of the component.
The appropriate finishing process depends on the component geometry, application and desired result.
IS PA12 CS THE RIGHT MATERIAL FOR YOUR APPLICATION?
Tell us about your component and its requirements. We will help you select the appropriate material, manufacturing process and post-processing options.
Already have your 3D data ready? You can also calculate your component directly online.
Downloads Material
Downloads e-coloring
